Double Glazing Window Locks Repairs
Double glazing window locks repairs are crucial to protect your home. The hinges and handles that are not in good condition could allow draughts into your home, making your windows vulnerable to burglars.
You can, however, repair the stiffness of uPVC handles or locks without replacing your door or window. Often, simply cooling or lubricating your mechanism can help resolve any issues.
Broken Glass
Over time, double glazing window locks get worn down. When this occurs, the handles may become hard to open or even lock shut. This can lead to problems with ventilation, and could also create a security risk. It's important that you get the window repaired as quickly as possible.
Double-glazed windows comprise two or more glass panes, with a gas between them to provide insulation. A seal also holds the panes together. If you see condensation between the glass panes, it is likely that one of these seals needs to be replaced. This will typically involve replacing just the one window pane and is a lot cheaper than replacing the entire window.
Cloudiness and condensation are typically caused by a blowing seal on windows with double glazing. This could be caused by a variety of factors, including air leaks, or the presence of moisture in the house. It is essential to contact a double glazing specialist to replace the gas and seal your double-glazed window as soon as you notice this issue.
It is possible to replace just one pane of double-glazed glass, however it is not recommended without the help of a specialist. It is necessary to have the right tools and expertise to complete the task safely. Doing it yourself could cause damage to the frame of the window, or even to your own health.
Many people use a crowbar in order to open their double-glazed windows when it's stuck, but it will typically result in the window frame being damaged and scratched. A window specialist can remove the handle from your window and then open it without causing further damage. They can also transform the old window mechanisms into modern ones.
Window hinges can become stiff and difficult to open with time particularly if they're located in an area that is noisy. To stop this from happening it is a good idea to lubricate the hinges on a regular basis using silicone spray. Do not close the window using the handles or closing it heavily. This could cause damage to the hinges.
Broken Sash
This is a frequent issue with older double-glazed windows. If the upper sash has fallen out of its pocket, it can be hard to lock it and then open the window. This is usually because the pins are not engaged or a balance shoe is disconnected. Each sash is different, so it's important to know how yours are configured before you attempt to fix it.
This can be solved by removing the sash and then cleaning it thoroughly. This will also reveal whether it's still a good fit. If not, you'll need to add sash stops in order to help hold it in place. These can be purchased online or at most hardware stores. After you've cleaned the sash and replaced the parting beads and apply lubrication to the pulley axles with a Teflon or silicone spray. It is a good idea to label the weights before you take them off to make sure you can return them correctly.
Another common issue is a damaged handle. It's difficult to tell if your windows handle is broken However, there are a few indicators. If the handle is spongy or stiff, or if it doesn't feel secure, it's probably broken.
This could be because of an unintentional lack of use or use, but it's possible that the handle has cracked or even become detached. In some cases, the handle might be broken inside and can't be repaired however it's still worth trying to fix it as soon as you notice the problem.
It is possible to remove the hinges that attach the window sash to the frame in order to take it off. It can be a difficult task, so you'll need someone to assist you in holding the sash in place. After removing the hinges, it is necessary to clean the area around them. You can also try to reconnect the hinges and then test the handle to be sure that it's functioning correctly. If it doesn't it, you might want to look into replacing it. This will make your window as secure as it can be.
Broken Handle
It's not unusual for window handles to break or weaken over time. It's important to repair any broken handles as soon as possible to avoid security and functional issues.
Fortunately window handles are fairly simple to replace. The window handle can be repaired by anyone with DIY skills. Contrary to the sash that is secured with multiple bolts, a window handle only requires two screws. After the new handle is in place, it's important to test it to ensure the mechanisms are operating properly. This includes locking the handle and examining for any gaps that could let in drafts or allow potential thieves to gain access to your home.
The most common cause of a broken handle on a window is simply wear and tear from frequent use. A broken handle can also be caused by excessive stress or force. Slamming or forcing a window open can cause additional strain on the handle, which can increase the chance of damage, therefore it's always best to carry out every handling task carefully and gently.
Other reasons for a broken hand include inadequate maintenance or aging, or design issues. Lack of regular cleaning and lubrication could cause the handle to break down prematurely, and this is often the result of dirt or debris that builds up over time. Additionally double glazing repairs could be weakened by incorrect installation or alignment issues.
If the solutions mentioned above aren't working, the Tasker will require access to the lock and remove itself. This may involve removing the frame or breaking out the existing window frame and plastic bead (to give more wriggle room). The new lock will then be fitted to match the profile of the uPVC handle. Once this is done the new handle will be put back on and the procedure is completed. Tasker will provide you with a quote on the cost of the repair if this is the situation.
Lock is faulty Lock
It is crucial to repair any broken window locks as soon as possible. The reason is that a damaged window could cause draughts and weaken home security barriers, making your home vulnerable to burglary. Window lock repairs are typically minor, but it is better to consult an expert before the issue gets worse and costs you more money.
UPVC window locks come in two versions: espagnolette handles and cockspur handles. The first uses a central rod to operate mushroom-like locking cams, which are locked into the window frame. The cams of the lock are activated by a handle attached to a spindle. The latch of the lock snaps into the mortise and is able to catch the window frame.
Both kinds of UPVC windows locks are susceptible to damage, especially in older homes. This can occur when the sash is damaged, warped, misaligned or even comes loose. In these instances, the lock must be reinstalled in order to stop draughts and loss of energy efficiency. A Tasker can replace the damaged lock for you, leaving you with the security of knowing that your windows are safe from intruders.
The first thing that a Tasker will do to fix your double glazing window lock is to examine it and determine the issue. Once they have all the information, they'll make their tools before arriving at your home. They'll usually bring a Phillips-head screwdriver, needle-nose pliers, wood putty, and fine-grit sandpaper.
If the sash has been misaligned the Tasker needs to loosen the screws securing both pieces of the lock to the frame. The Tasker will then take off the latch and fill in the mounting holes (if appropriate) with wood putty before sanding the area to ensure it is as flush as the rest.
If the lock is rusted, they'll clean it using a wire brush or oil, and then lubricate it by applying grease to keep it working smoothly. They will also check the condition of the latch and reinstall it.